Curlin 4000 User Manual - Med-E-Quip Locators

More documents

Recommendations

Info

ITEMOperating Time with Full ChargeBatteries:Internal Memory BatteryDisplayFlow RatesKVO RatesVolume AccuracyAdministration SetsFill Volume for Administration SetsUp Occlusion Detection TimeMicrobore tubing with occlusionbelow spikeSPECIFICATIONNominal 10 hours at a rate of 400 ml/hrNominal 30 hours at a rate of 125 ml/hrNominal 85 hours at a rate of 2 ml/hr5 years lifeGraphic LCD, 4 text fields, 16 characters perfield0.1 to 400 ml/hr0 to 10 ml/hr. Can be set at “0” in Continuous,TPN, Variable and Intermittent Therapies± 5% for volume delivery >1 ml under thefollowing conditions:• Temperature 55° to 90° F• Back pressure to 300 mmHg (5.8 PSI)±10% for volume delivery >1 ml under thefollowing conditions:• Temperature 45° to 55°F• Temperature 90° to 104°F• Back pressure to 750 mmHg (14.5 PSI)The maximum volume that may be infused underSingle Fault Conditions is 0.8 ml.Recommended administration set usage not toexceed 72* hours.*follow standards of practice for set changesProprietary <strong>Curlin</strong> <strong>Med</strong>ical non-DEHP, PVCadministration sets available in differentconfigurations.Nonfiltered microbore sets ± 4 ml.See individual administration set label for specificfill volumeRate0.1 ml/hr1 ml/hr10 ml/hr50 ml/hrTime to Alarm
ITEMDown Occlusion Detection TimeMicrobore tubing with occlusion atdistal LuerProgrammable Time (HH:MM)ContinuousTPNIntermittentVariablePCASPECIFICATIONRate0.1 ml/hr1 ml/hr10 ml/hr50 ml/hr125 ml/hrLow Pressure
Page 1 and 2:
CURLIN MEDICALUser’s Manualfor us
Page 3 and 4:
TABLE OF CONTENTSEntering or Changi
Page 5 and 6:
TABLE OF CONTENTSPrime.............
Page 7 and 8:
IntroductionChapter1IntroductionThe
Page 9 and 10:
• Retained memory features that a
Page 11 and 12:
CAUTIONS• U.S. federal law restri
Page 13 and 14:
• This equipment generates, uses,
Page 15 and 16:
Serial Number LabelIntroductionBatt
Page 17 and 18:
Preparing Medication for Infusion/C
Page 19 and 20:
Opening and Closing the Pump DoorTh
Page 21 and 22:
Air DetectorNote: Open theslide cla
Page 23 and 24:
Installing the Batteries and Using
Page 25 and 26:
IMPORTANTINFORMATIONWhenever an ext
Page 27 and 28:
IntroductionLocking SleeveTwo-Pin A
Page 29 and 30:
Chapter2Learning Pump FeaturesLearn
Page 31 and 32:
LED Light IndicatorsThis “three-l
Page 33 and 34:
Chapter3Basics of ProgrammingThe Cu
Page 35 and 36:
whenever an alarm or error code occ
Page 37 and 38:
Access CodeClinician Access Code Sc
Page 39 and 40:
to all pump functions. Each level h
Page 41 and 42:
8 PRINT PATIENT HISTORY: To print t
Page 43 and 44:
a. Time Format: You have the option
Page 45 and 46:
If only one therapy is programmed a
Page 47 and 48:
Chapter4Continuous TherapyContinuou
Page 49 and 50:
If the KVO rate is set to 0, the pu
Page 51 and 52:
6 DONE?: If any changes are to be m
Page 53 and 54:
The following screen displays the C
Page 55 and 56:
detects in-line pressures at 400 mm
Page 57 and 58:
In CMS-enabled pumps, the graphic b
Page 59 and 60:
. If the incomplete therapy is to b
Page 61 and 62:
PCA TherapyChapter5PCA TherapyPCA o
Page 63 and 64:
a. MxRATE (Maximum Rate) limits: Us
Page 65 and 66:
using the numeric keys and, when co
Page 67 and 68:
Note. After the infusion has starte
Page 69 and 70:
d. To exit the shift total feature
Page 71 and 72:
pressures at 400 mmHg ±150 (8 ±3
Page 73 and 74:
This screen will continue to displa
Page 75 and 76:
When the program is accepted, the d
Page 77:
which therapy to repeat by moving t
Page 80 and 81:
The time format (12 hr AM/PM or 24
Page 82 and 83:
time period using the numeric keys,
Page 84 and 85:
7 To continue priming, press the PR
Page 86 and 87:
Note: Whatever Down Ramp time was a
Page 88 and 89:
1 The first field displays the “R
Page 90 and 91:
. If the incomplete therapy is to b
Page 95 and 96:
IMPORTANTINFORMATIONDuring the dela
Page 97 and 98:
10 DONE?: If there are any changes
Page 99 and 100:
The following screen displays the I
Page 101 and 102:
This message alerts you to the Air-
Page 103 and 104:
Intermittent Information ScreensInt
Page 105 and 106:
Intermittent Dosing ScheduleThe dos
Page 107 and 108: This screen displays:1 “INFUSION
Page 109 and 110: CHAPTER8Variable TherapyThis therap
Page 111 and 112: During the delay start period, if t
Page 113 and 114: 5 NEXT?: If there are any changes t
Page 115 and 116: 7 To continue priming, press the PR
Page 117 and 118: 4 DN Occlu (Down Occlusion): This f
Page 119 and 120: Variable Run Screen 2This screen di
Page 121 and 122: stop the auto-advance function by p
Page 123 and 124: The pump will then display the prog
Page 125 and 126: TroubleshootingChapter9Troubleshoot
Page 127 and 128: LCD Display:Alert:Cause:Resolution:
Page 129 and 130: If it is not necessary to preserve
Page 131 and 132: Resolution:LCD Display:Alert:Cause:
Page 133 and 134: LCD Display: ALERT NEW DOSE IS LESS
Page 135 and 136: LCD Display:Alert:Cause:Resolution:
Page 137 and 138: ALARMSAlarms are conditions that re
Page 139 and 140: LCD Display:Alarm:Cause:Resolution:
Page 141 and 142: ERROR CODESIf a pump goes into an e
Page 143 and 144: ErrorCodeLCD DisplayedMessage162 St
Page 145 and 146: ChapterAccessories10There are a num
Page 147 and 148: AccessoriesFigure 10.3 Safety Shell
Page 149 and 150: Keypad CoversThese accessories are
Page 151 and 152: Chapter11Cleaning, EnvironmentalCon
Page 153 and 154: 1 PARTIES COVERED BY THIS WARRANTY:
Page 155 and 156: d Program the following CONTINUOUS
Page 157: Chapter12TechnicalSpecificationsThe
Page 161 and 162: Curlin pump inusing at .1 ml/hr w i
Page 163 and 164: Percent Error, Curlin Pump infusing
Page 165 and 166: Clinician Information andAccess Cod
show all

Curlin 4000 User Manual - Med-E-Quip Locators

Create successful ePaper yourself

Delete template?

Save as template?