Curlin 4000 User Manual - Med-E-Quip Locators

. If the incomplete therapy is to be continued, press “NO” and the Pause Menu screen willbe displayed, then press “YES” and the Run Options screen will be displayed. To resumethe unfinished therapy, press “RUN”.Entering a New Program3 NEW PROGRAM: To program an entirely new prescription or different therapy, press the“YES/ENTER” key at this field (the ability to change these parameters may be controlled bythe lock setting). The display will return to the “Select Therapy Screen” if more than onetherapy mode is enabled, or to the “Pre-Prescription Screen” of the single therapy mode. Ifthe current container has not completely infused, the following screen will appear:a. This screen is a reminder that the infusion is not complete. If you want to return to thecurrent container and finish infusing it, press the “NO/CHANGE” key to return to thePause Menu screen.b. To abort the current container and enter a new program, press the “YES/ENTER” key.If a prescription has previously been entered for the therapy mode you wish to program,the following screen will appear:c. If you want to save the current prescription, press the “NO/CHANGE” key to return tothe Pause Menu screen. If you wish to erase the current prescription and enter a newprogram, press the “YES/ENTER” key to proceed. All previous prescription values willbe erased.Note: Selecting “NEW PROGRAM” will also reset the OPTIONS selected to their defaultsettings except for the LOCK and AUDIO settings which must be changed manually.Infusion CompleteWhen the infusion is complete, the audio alarm will beep, and the following screen will display:Note: To temporarily silence the alarm, press the “Silence” key.TPN Infusion Complete84