Curlin 4000 User Manual - Med-E-Quip Locators

pump has been set into a locked condition, any subsequent request to change the lock willrequire a clinician access code. (See “Clinical Information and Access Code” chapter foraccess code information, lock setting table and available features for each lock setting).2 HRLY TOT (Hourly Totals): To view hourly infusion totals press the “NO/CHANGE” keyto change OFF to ON and then press “YES/ENTER”. The following screen will appear:Hourly Totals Screena. The screen displays hourly infusion delivery for each hour (00-23) of the last 24hours of therapy in the unit selected.a. The highlighted field has a marker ◄ indicating the current hour in progress.b. Use the up arrow key to scroll back through the last 24 hours.c. If the infusion was not running, a series of ------ will appear for that hour.d. To exit this screen, press the NO/CHANGE key.TPN Therapy3 CLR HRLY (Clear Hourly Totals): To clear Hourly Totals press the “NO/CHANGE” keyto change OFF to ON and then press “YES/ENTER”. The following screen will appear:Clear Hourly Totals Screena. To clear the Hourly Totals, press the “YES/ENTER” key. All Hourly Totals will becleared and the cursor will return to the Options menu.b. To maintain the Hourly Totals, press the “NO/CHANGE” key. Hourly Totals will bemaintained and the cursor will return to the Options menu.c. A lock level of 2 or 3 will require an access code entry before allowing “Hourly Totals”reset.4 DN Ramp (Early Down Ramp): During a TPN infusion, it may be necessary or desirable tostop the level rate of infusion and begin an early down ramp process. The range for this fieldis 0:00 to 9:00 HH:MM. Selecting early ramp down by selecting “ON” and pressing the“YES/ENTER” key when the highlight bar is on this field brings a second screen as seenbelow:79