11.07.2015 Views

Curlin 4000 User Manual - Med-E-Quip Locators

Curlin 4000 User Manual - Med-E-Quip Locators

Curlin 4000 User Manual - Med-E-Quip Locators

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

The screen offers the user three options:Resuming the Current Container1 RESUME: To resume the therapy in progress from where it left off, press the“YES/ENTER” key at this field. The pump will return to the Run Options Screen, and youcan resume the therapy.Note: If you wish to hang a new container, move the cursor to REPEAT Rx (see followingsection).Run Options Screena. Press the “RUN” key to resume the therapy.b. Press the “NO” key to go back to the programming screen to make changes in thetherapy program (this feature may be blocked by a security lock, thus not allowingchanges to the program unless an access code is given). Also, remember that no changesare allowed in the first prescription menu if an infusion is in progress.c. Press the “OPTIONS” or “PRIME” keys if either of these functions is desired at thistime.TPN TherapyHanging a New Container2 REPEAT Rx: To repeat the present therapy and add another IV container with the sameprescription, press the “YES/ENTER” key at this field. If more than one therapy isprogrammed, a “Select Therapy Screen” will list all preprogrammed therapies. Select whichtherapy to repeat by moving the cursor to the therapy of choice and pressing the“YES/ENTER” key.The pump will then display the program screen with the last programmed values of thetherapy and the cursor will automatically advance through the prescription menus. You canstop the auto-advance function by pressing any key (except ON/OFF) and then complete theconfirmation of the prescription manually by pressing the “YES” key at the remaining fields.When the program is accepted, the display returns to the above “Run Options Screen.” If thecurrent therapy is still in progress when the “REPEAT Rx” function is selected, the followingscreen will appear:a. This screen is a reminder that the infusion is not complete. If the therapy is to beterminated and a new IV container added, press “YES/ENTER” to go to theprogramming screen, confirm the program and proceed with the repeat infusion.83

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!