Curlin 4000 User Manual - Med-E-Quip Locators

When the program is accepted, the display returns to the above “Run Options Screen.” If thecurrent therapy is still in progress when the “REPEAT Rx” function is selected, the followingscreen will appear:a. This screen is a reminder that the infusion is not complete. If the therapy is to beterminated and a new IV container added, press “YES/ENTER” to go to theprogramming screen, confirm the program and proceed with the repeat infusion.b. If the incomplete therapy is to be continued, press “NO” and the Pause Menu screen willbe displayed, then press “YES” and the Run Options screen will be displayed. To resumethe unfinished therapy, press “RUN”.PCA PCA TherapyEntering a New Program3 NEW PROGRAM: To program an entirely new prescription or different therapy, press the“YES/ENTER” key at this field (the ability to change these parameters may be controlled bythe lock setting). The display will return to the “Select Therapy Screen” if more than onetherapy mode is enabled, or to the “Pre-Prescription Screen” of the single therapy mode. Ifthe current container has not completely infused, the following screen will appear:a. This screen is a reminder that the infusion is not complete. If you want to return to thecurrent container and finish infusing it, press the “NO/CHANGE” key to return to thePause Menu screen.b. To abort the current container and enter a new program, press the “YES/ENTER” key.If a prescription has previously been entered for the therapy mode you wish to program,the following screen will appear:69