Curlin 4000 User Manual - Med-E-Quip Locators

8 PRINT PATIENT HISTORY: To print the patient history log, connect the Data InterfaceCable to the communication port on left side of the pump before selecting this command.(FOLLOW DIRECTIONS THAT ACCOMPANY THE DATA INTERFACE CABLE.)The pump will display:When you select “YES,” the display will read “Printing Patient History Record.” When theprinting is completed, the pump display returns to the BIOMED SETUP Menu. To abortthe printing process, press the “NO/CHANGE” key on the pump’s keypad, and the displaywill return to the BIOMED SETUP Menu. If the Patient History Log stops before all data istransferred, exit and restart the “Print Pt. Hx” command.Note: To utilize the print feature of the Curlin Medical pump, you must have a PC runningthe Hyperterminal program within MS Windows, and use the Curlin Medical DataInterface Cable which is purchased separately. Detailed user instructions are providedwith the cable.Clearing the History Log9 CLEAR Hx LOG: This feature is used to clear the patient history log from the pump. Whenyou select “YES/ENTER,” the pump displays:When you select “YES,” the history log is cleared and the display returns to the BIOMEDSETUP Menu. Selecting “NO” aborts the feature and also returns to the menu.Basics ProgrammingClearing Patient Information10 CLEAR Rx: When this command is selected, prescription information for all currentlyprogrammed therapies is cleared; however, the patient data is retained. When you select“YES/ENTER” the pump displays:When you select “YES,” all prescription programs are cleared, and the display returns to theBIOMED SETUP Menu. Selecting “NO” aborts the feature and also returns to the menu.35