11.07.2015 Views

Curlin 4000 User Manual - Med-E-Quip Locators

Curlin 4000 User Manual - Med-E-Quip Locators

Curlin 4000 User Manual - Med-E-Quip Locators

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Resume/Repeat Rx/New Program MenuThere are three different ways that you can start a therapy:• RESUME: Should be used if a therapy is interrupted. The pump picks up where itleft off, and continues the therapy.• REPEAT Rx: Should be used to hang a new bag and repeat the same therapy overagain. The infusion history displayed is reset (volume infused, boluses requested,boluses received, etc). Shift Totals and Hourly Totals continue to accrue.• NEW PROGRAM: Should be used to program a totally new Rx. All the therapyparameters in the pump are set to factory default and must be re-entered by theclinician.The judicious choice of the option can help speed up programming. This screen gives you allthree options:Resuming a therapy1 RESUME—If a therapy is interrupted and the pump is turned off or paused beforecompletion of the infusion, you may select “RESUME” by moving the cursor to this fieldand pressing the “YES/ENTER” key. A notification screen displays, and a prompt is givento run the pump. At this time, you can continue to infuse the prescription from the exactpoint at which it was interrupted.Note: Patients should be taught proper time frames or limitations for leaving their IV bags ormedication reservoirs “hanging” during an interrupted state and, if indicated, to change toa new bag according to the healthcare provider’s policies and drug manufacturer’sinstructions.Repeating a Pre-Programmed Therapy2 REPEAT Rx—Use this feature if an infusion is complete and you wish to repeat the sameprescription over again or if a therapy is programmed and the pump is turned off before theinfusion is started. Select this field by moving the cursor to “REPEAT Rx,” and press the“YES/ENTER” key.If the pump has been programmed for more than one therapy and you wish to select atherapy at this time, move the cursor to “REPEAT Rx,” and press the “YES/ENTER” key.This action will take you to the “Select Therapy Screen” and allow you to choose which of theprograms you now wish to repeat.Note: If you are choosing a therapy that is different than the last one selected, “Shift Totals”and “Hourly Totals” will be cleared.38

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!