Curlin 4000 User Manual - Med-E-Quip Locators

If only one therapy is programmed and REPEAT Rx is selected, the cursor will automaticallyadvance through the prescription menus. You can stop the auto-advance function by pressingany key (except ON/OFF) and then complete the confirmation of the prescription bypressing the “YES” key at the remaining fields.Note: REPEAT Rx does not allow any changes to the Pre-Prescription Menu. If changesneed to be made in Pre-Prescription selections (units, concentration, etc.) select “NewProgram” and reenter the entire prescription.The lock settings affect the use of “REPEAT Rx”. Lock 1 allows REPEAT with changes tothe prescription screen only. Lock 2 allows REPEAT but does NOT allow the user to makechanges in the prescription. Lock 3 does not allow REPEAT. (See lock setting table).If a therapy has not completed and the REPEAT Rx function is selected, the following screenwill display:If the current infusion is to be discontinued and a new IV bag started, press “YES/ENTER”to repeat.If the current infusion is to continue, press “NO,” and you will be prompted to resume thetherapy.How to go to “New Program”3. NEW PROGRAM—If the cursor is moved to this field and the ‘“YES/ENTER” key ispressed, the display changes to allow you to select which therapy you wish to program:Basics ProgrammingSelecting a TherapySelect Therapy ScreenThis screen displays only those therapies enabled from the BIOMED SETUP Menu. Movethe cursor to the appropriate therapy and select it by pressing the “YES/ENTER” key. Ifonly one therapy is enabled, this screen will not display, and the pump will automatically moveto the first screen for specific therapy programming.39