Voicemail Pro installation - IP Office Info

4.2 Confirm Call Flow Download Window
When you connect to a server across a LAN or WAN to view or modify the call flow on the server, a check is made to see
if the call flow that is stored locally on the client is the same. The call flow on the server might be different to the call flow
on the client because:
· The local call flow is older than the version on the server, for example if the call flow on the server has been
modified by another Client connection.
· The local call flow is newer than the version on the server, for example if the call flow on the server has been
worked on while the local Client was being used in offline mode.
· The local call flow is from a different server, for example if you are connecting to a different server to the one from
which the call flow was previously downloaded.
If the call flow is the same, no data will need to be copied from the server to the client. If the call flow is different you
can chose to download the call flow from the server or to use the local call flow.
· Download
Click to download the call flow from the server.
· Cancel
Click this if you do not want to download the call flow from the server.
To upload the local call flow to the server, use the Save or Save and Make Live options from the File menu. See
Saving Changes and Making them Live 81 .
4.3 Continue Offline Message Window
Only one Voicemail Pro client can be connected to a voicemail server at any time. To prevent an idle client session from
blocking the server, a Client/Server Connection Timeout (mins) 97
setting is used to disconnect the idle client session. By
default, the timeout is set to 5 minutes.
If your Voicemail Pro client session has timed out, the Voicemail Pro client will prompt you whether to re-establish the
session or close. You are then able to continue working in offline mode or to close the client.
Implementing Voicemail Pro Page 80
IP Office 8.1
15-601064 Issue 8b (Tuesday, December 11, 2012)