Multilin 469 Motor Management Relay ... - GE Digital Energy

4.2 EnerVista 469 Setup Software Interface
4.2.1 Overview
CHAPTER 4: INTERFACES
The front panel provides local operator interface with a liquid crystal display. The EnerVista
469 Setup software provides a graphical user interface (GUI) as one of two human
interfaces to a 469 device. The alternate human interface is implemented via the device's
faceplate keypad and display (see the first section in this chapter).
The EnerVista 469 Setup software provides a single facility to configure, monitor, maintain,
and trouble-shoot the operation of relay functions, connected over serial communication
networks. It can be used while disconnected (i.e. off-line) or connected (i.e. on-line) to a 469
device. In off-line mode, Settings files can be created for eventual downloading to the
device. In on-line mode, you can communicate with the device in real-time.
This no-charge software, provided with every 469 relay, can be run from any computer
supporting Microsoft Windows ® 95 or higher. This chapter provides a summary of the
basic EnerVista 469 Setup software interface features. The EnerVista 469 Setup help file
provides details for getting started and using the software interface.
With the EnerVista 469 Setup running on your PC, it is possible to
• Program and modify settings
• Load/save Settings files from/to disk
• Read actual values and monitor status
• Perform waveform capture and log data
• Plot, print, and view trending graphs of selected actual values
• Download and playback waveforms
• Get help on any topic
4–10 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL