Multilin 469 Motor Management Relay ... - GE Digital Energy

CHAPTER 4: INTERFACES
Settings files are organized on the basis of file names assigned by the user. A Settings file
contains data pertaining to the following types of relay settings:
• Device Definition
• Product Setup
• System Setup
• Digital Inputs
• Output Relays
• Protection Elements
• Monitoring Functions
• Analog Inputs and Outputs
• Relay Testing
• Settings for Two-Speed Motors
• User Memory Map Setting Tool
Factory default values are supplied and can be restored after any changes.
The EnerVista 469 Setup display relay settings with the same hierarchy as the front panel
display. For specific details on settings, refer to Chapter 5.
Downloading and Saving Settings Files
Settings must be saved to a file on the local PC before performing any firmware upgrades.
Saving settings is also highly recommended before making any settings changes or
creating new Settings files.
The EnerVista 469 Setup window, Settings files are accessed in the Settings List control bar
window or the Files Window. Use the following procedure to download and save Settings
files to a local PC.
Ensure that the site and corresponding device(s) have been properly
defined and configured as shown in Connecting EnerVista 469 Setup
to the Relay on page 4–16.
Select the desired device from the site list.
Select the File > Read Settings from Device menu item to obtain
settings information from the device.
After a few seconds of data retrieval, the software will request the name and destination
path of the Settings file. The corresponding file extension will be automatically assigned.
Press Save to complete the process. A new entry will be added to the
tree, in the File pane, showing path and file name for the Settings file.
Adding Settings Files to the Environment
The EnerVista 469 Setup software provides the capability to review and manage a large
group of Settings files. Use the following procedure to add a new or existing file to the list.
In the files pane, right-click on ‘Files’.
Select the Add Existing Settings File item as shown:
4–24 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL