Multilin 469 Motor Management Relay ... - GE Digital Energy

6.3.2 Temperature
PATH: ACTUAL VALUES A2 METERING DATA TEMPERATURE
TEMPERATURE [
]
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
HOTTEST STATOR
RTD
RTD#1: 40°C
RTD #1
TEMPERATURE: 40°C
RTD #2
TEMPERATURE: 40°C
RTD #3
TEMPERATURE: 40°C
RTD #4
TEMPERATURE: 40°C
RTD #5
TEMPERATURE: 40°C
RTD #6
TEMPERATURE: 40°C
RTD #7
TEMPERATURE: 40°C
RTD #8
TEMPERATURE: 40°C
RTD #9
TEMPERATURE: 40°C
RTD #10
TEMPERATURE: 40°C
RTD #11
TEMPERATURE: 40°C
RTD #12
TEMPERATURE: 40°C
CHAPTER 6: ACTUAL VALUES
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted).
Range: –50 to 250°C, No RTD (open), ---
- (shorted).
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted).
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
Range: –50 to 250°C, No RTD (open), ---
- (shorted)
The current level of the 12 RTDs is displayed here. If the RTD is not connected, the value will
be “No RTD”. The values will reflect the RTD names as programmed. The HOTTEST STATOR
RTD value is shown only if at least one RTD is set as “Stator”.
If no RTDs are programmed in S8 RTD TEMPERATURE, the THIS FEATURE NOT
PROGRAMMED flash message will appear when an attempt is made to enter this group of
messages.
6–12 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL