Multilin 469 Motor Management Relay ... - GE Digital Energy

c. Learned and last starting capacity.
d. Average motor load.
CHAPTER 1: GETTING STARTED
4. Maintenance data. This is useful statistical information that may be used for
preventive maintenance. It includes:
a. Trip counters
b. General counter such as number of motor starts, number of emergency restarts,
number of starter operations, digital counter for other purposes not listed above.
c. Timers such as motor running hours, time between starts timer, and five start
timers used to calculate the average start time of the motor.
5. RTD Learned Data, which includes the maximum temperature measured by each of
the 12 RTDs.
6. Event recorder downloading tool.
7. Product information including model number, firmware version, additional product
information, and calibration dates.
8. Oscillography downloading tool.
Alarm, trip conditions, diagnostics, and system flash messages are grouped under Target
Messages.
To access settings,
Press the MENU key to access the header of each menu, which will
be displayed in the following sequence:
SETTINGS [
]
ACTUAL
VALUES []
TARGET
MESSAGES []
Press the MENU key until the display shows the header of the
Settings menu.
Press the MESSAGE or ENTER key to display the header for the
first Settings page.
The Settings pages are numbered, have an ‘S’ prefix for easy
identification and have a name which provides a general idea of the
settings available in that page.
Pressing the MESSAGE and MESSAGE keys will scroll through
all the available Settings page headers. Settings page headers look
as follows:
1–4 469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL