Multilin 469 Motor Management Relay ... - GE Digital Energy

CHAPTER 6: ACTUAL VALUES
6.3.6 Demand Metering
6.3.7 Analog Inputs
PATH: ACTUAL VALUES A2 METERING DATA DEMAND METERING
DEMAND [
]
METERING
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
CURRENT
DEMAND: 0 Amps
REAL POWER
DEMAND: 0 kW
REACTIVE POWER
DEMAND: 0 kvar
APPARENT POWER
DEMAND: 0 kVA
PEAK CURRENT
DEMAND: 0 Amps
Range: 0 to 100000 A
Range: 0 to 99999 kW
The values for current and power demand are shown. The power demand values are not
shown if the VT RATIO is programmed as “None”. Peak Demand information is cleared with
the S1 469 SETUP CLEAR DATA CLEAR PEAK DEMAND DATA settings. Demand is
shown only for positive real and positive reactive power.
PATH: ACTUAL VALUES A2 METERING DATA ANALOG INPUTS
ANALOG [
]
INPUTS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
PEAK REAL POWER
DEMAND: 0 kW
PEAK REACTIVE
POWER
PEAK APPARENT
POWER
ANALOG I/P 1
0 Units
ANALOG I/P 2
0 Units
ANALOG I/P 3
0 Units
ANALOG I/P 4
0 Units
ANALOG 1-2
0 Percent
ANALOG 1-2
0 Units
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
Range: 0 to 100000 A
Range: 0 to 99999 kW
Range: 0 to 99999 kvar
Range: 0 to 65535 kVA
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –50000 to 50000. Seen only if
Analog Input is programmed.
Range: –5100 to 4900%. Seen only if
Analog In Diff 1-2 set to %Diff
Range: –100000 to 100000. Seen only
if Analog In Diff 1-2 is Abs Diff
469 MOTOR MANAGEMENT RELAY – INSTRUCTION MANUAL 6–15