final bid specs 09328.pdf - Freese and Nichols, Inc.

09 91 23 INTERIOR PAINTING
1.00 0BGENERAL
1.01 3BRELATED DOCUMENTS
A. 2BDrawings and general provisions of the Contract, including General and Supplementary Conditions
and Division 01 Specification Sections, apply to this Section. Refer to Section 09 96
00, PROTECTIVE COATINGS to determine painting requirements for plant equipment and
other structures.
1.02 4BSUMMARY
A. 23BThis Section includes surface preparation and the application of paint systems on the following
interior substrates:
1. 81BConcrete.
2. 82BSteel.
3. 83BGalvanized metal.
4. 84BAluminum (not anodized or otherwise coated).
5. 85BWood.
6. 86BGypsum board.
B. 24BRelated Sections include the following:
1.03 5BSUBMITTALS
1. 87BDivision 05 Sections for shop priming of metal substrates with primers specified in this
Section.
2. 8BDivision 06 Sections for shop priming carpentry with primers specified in this Section.
3. 89BDivision 08 Sections for factory priming windows and doors with primers specified in this
Section.
4. 90BDivision 09 painting Sections for special-use coatings.
5. 91BDivision 09 Section "Exterior Painting" for surface preparation and the application of paint
systems on exterior substrates.
A. 25BProduct Data: For each type of product indicated.
B. 26BSamples for Initial Selection: For each type of topcoat product indicated.
C. 27BSamples for Verification: For each type of paint system and in each color and gloss of topcoat
indicated.
1. 92BSubmit Samples on rigid backing, 8 inches (200 mm) square.
2. 93BStep coats on Samples to show each coat required for system.
3. 94BLabel each coat of each Sample.
4. 95BLabel each Sample for location and application area.
D. 28BProduct List: For each product indicated, include the following:
1. 96BCross-reference to paint system and locations of application areas. Use same designations
indicated on Drawings and in schedules.
Interior Painting 09 91 23 - 1
DPR09328