final bid specs 09328.pdf - Freese and Nichols, Inc.

C. 41BCementitious Galvanized-Metal Primer: MPI #26.
1. 14BVOC Content: E Range of E1.
D. 42BWaterborne Galvanized-Metal Primer: MPI #134.
E. 43BQuick-Drying Primer for Aluminum: MPI #95.
2.05 13BWOOD PRIMERS
A. 4BInterior Latex-Based Wood Primer: MPI #39.
2.06 14BLATEX PAINTS
A. 45BInterior Latex (Eggshell): MPI #52 (Gloss Level 3).
B. 46BInterior Latex (Satin): MPI #43 (Gloss Level 4).
C. 47BInterior Latex (Semigloss): MPI #54 (Gloss Level 5).
2.07 15BALUMINUM PAINT
A. 48BAluminum Paint: MPI #1.
2.08 16BFLOOR COATINGS
A. 49BInterior/Exterior Clear Concrete Floor Sealer (Water Based): MPI #99.
B. 50BInterior/Exterior Clear Concrete Floor Sealer (Solvent Based): MPI #104.
3.00 2BEXECUTION
3.01 17BEXAMINATION
A. 51BExamine substrates and conditions, with Applicator present, for compliance with requirements
for maximum moisture content and other conditions affecting performance of work.
B. 52BMaximum Moisture Content of Substrates: When measured with an electronic moisture meter
as follows:
1. 15BConcrete: 12 percent.
2. 16BMasonry (Clay and CMU): 12 percent.
3. 17BWood: 15 percent.
4. 18BGypsum Board: 12 percent.
5. 19BPlaster: 12 percent.
C. 53BVerify suitability of substrates, including surface conditions and compatibility with existing finishes
and primers.
D. 54Begin coating application only after unsatisfactory conditions have been corrected and surfaces
are dry.
1. 120Beginning coating application constitutes Contractor's acceptance of substrates and conditions.
Interior Painting 09 91 23 - 4
DPR09328