final bid specs 09328.pdf - Freese and Nichols, Inc.

22 00 01 PLUMBING SYSTEMS
1.00 GENERAL
1.01 WORK INCLUDED
A. Provide labor, materials, equipment and incidentals for complete, operable plumbing
systems.
1.02 QUALITY ASSURANCE
A. Verify location, size, depth and pressure of each utility prior to beginning work. If conditions
are found that will adversely affect the installation, notify the Architect or Engineer in writing.
B. Plumbing fixtures and trim of like kind shall be of the same manufacturer throughout the
project, in the following categories:
1. Water closets, lavatories,
2. Countertop sinks
3. Electric water coolers
4. Emergency shower, eye and face washes
5. Faucets, mixing valves (other than thermostatic mixing valves)
6. Tailpiece, fixture traps, escutcheons, arm extensions, strainers
7. Fixture carriers
1.03 WATER USAGE REQUIREMENTS: WATER SAVING PERFORMANCE STANDARDS OF THE
TEXAS COMMISSION ON ENVIRONMENTAL QUALITY ADOPTED DECEMBER 14, 2005,
SHALL APPLY TO EVERY FIXTURE INCLUDED HEREIN.
A. The maximum flow from a sink or lavatory faucet shall not exceed 2.20 gallons of water per
minute at 60 psig.
B. The maximum volume of water per flush from a toilet (water closet) shall not exceed 1.60
gallons (1.6 gpf)SUBMITTALS
C. Provide Submittals in accordance with Division 1, SUBMITTALS and include Manufacturer's
product data sheets for the following:
1. Plumbing fixtures and trim.
2. Piping materials and valves.
3. Equipment and accessories.
D. Operation And Maintenance Data: Submit operation and maintenance data in accordance
with Division 1.
1.04 STANDARDS
A. AUTHORITY HAVING JURISDICTION
1. Perform all work in accordance with the regulations and ordinances of federal, state, and
local agencies, who have lawful jurisdiction over the Place of Record. Notify proper
authorities for inspections as work progresses.
B. CODES AND ORDINANCES
1. The design and installation shall be in accordance with the applicable provisions of the
following codes and ordinances. These codes and ordinances shall apply as if written
here in their entirety:
2006 International Plumbing Code (IPC), with any local city amendments.
2006 International Energy Conservation Code (IECC), with any local city
amendments.
Plumbing Systems 22 00 01 - 1
DPR09328