final bid specs 09328.pdf - Freese and Nichols, Inc.

07 92 00 JOINT SEALANTS
1.00 GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
and Division 01 Specification Sections, apply to this Section.
1.02 SUMMARY
A. This Section includes joint sealants for the [applications indicated in the Joint-Sealant Schedule
at the end of Part 3.
1. Exterior joints in the following vertical surfaces and horizontal non-traffic surfaces:
2. Construction joints in cast-in-place concrete.
a. Joints between metal panels.
b. Joints between different materials listed above.
c. Perimeter joints between materials listed above and frames of doors, and louvers.
d. Control and expansion joints in overhead surfaces]
e. Other joints as indicated.
3. Exterior joints in the following horizontal traffic surfaces:
4. Isolation and contraction joints in cast-in-place concrete slabs.
5. Interior joints in the following vertical surfaces and horizontal nontraffic surfaces:
6. Control and expansion joints on exposed interior surfaces of exterior walls.
a. Perimeter joints of exterior openings where indicated.
b. Perimeter joints between interior wall surfaces and frames of interior doors] and .
7. Interior joints in the following horizontal traffic surfaces:
8. Isolation joints in cast-in-place concrete slabs.
B. Related Sections include the following:
1. Division 07 Section "Fire-Resistive Joint Systems" for sealing joints in fire-resistancerated
construction.
2. Division 32 Section "Concrete Paving Joint Sealants" for sealing joints in pavements,
walkways, and curbing.
1.03 PERFORMANCE REQUIREMENTS
A. Provide elastomeric joint sealants that establish and maintain watertight and airtight continuous
joint seals without staining or deteriorating joint substrates.
B. Provide joint sealants for interior applications that establish and maintain airtight and waterresistant
continuous joint seals without staining or deteriorating joint substrates.
1.04 SUBMITTALS
A. Product Data: For each joint-sealant product indicated.
B. Samples for Initial Selection: Manufacturer's color charts consisting of strips of cured sealants
showing the full range of colors available for each product exposed to view.
Joint Sealants 07 92 00 - 1
DPR09328