final bid specs 09328.pdf - Freese and Nichols, Inc.

E. Electrical Components, Devices, and Accessories: Listed and labeled as defined in
NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction, and
marked for intended use.
2.00 PRODUCTS
2.01 MANUFACTURERS
A. Subject to compliance with requirements, provide all new products by one of the following:
1. FACP and Equipment:
a. Edwards Systems Technology Inc.
b. Honeywell International Inc.
c. NOTIFIER.
d. Silent Knight.
e. Gamewell-FCI.
f. Approved equal.
2. Wire and Cable shall be as recommended by the system manufacturer or one of the following:
a. Comtran Corporation.
b. Helix/HiTemp Cables, Inc.
c. Rockbestos-Suprenant Cable Corporation.
a. DRAKA USA.
b. West Penn Wire/CDT.
3. Audible and Visual Devices:
a. As manufactured by the FACP manufacturer.
b. System Sensor.
c. Wheelock.
d. Approved equal.
2.02 FACP
A. General Description:
1. Modular, power-limited design with electronic modules, UL 864 listed.
2. Addressable control circuits for operation of mechanical equipment.
B. Alphanumeric Display and System Controls: Arranged for interface between human operator
at the FACP and addressable system components including annunciation and supervision.
Display time and date, alarm, supervisory, and component status messages and the programming
and control menu.
1. Annunciator and Display: Liquid-crystal type, two line(s) of 20 characters, minimum.
2. Keypad: Arranged to permit entry and execution of programming, display, and control
commands.
3. Alarm History: Capability to display/call-up alarm history report for a minimum of 500
events at this display shall be provided.
4. It shall be possible to view a sensitivity test report from this display for all smoke detectors
connected to the system.
C. Circuits:
1. Signaling Line Circuits: NFPA 72, Class A, Style 6.
Fire Alarm and Detection System 13 85 10-4
DPR09328