final bid specs 09328.pdf - Freese and Nichols, Inc.

1.06 DELIVERY, STORAGE, AND HANDLING
A. Deliver fans as factory-assembled unit, to the extent allowable by shipping limitations, with
protective crating and covering.
B. Disassemble and reassemble units, as required for moving to final location, according to
manufacturer's written instructions.
C. Lift and support units with manufacturer's designated lifting or supporting points.
1.07 COORDINATION
A. Coordinate size and location of structural-steel support members.
B. Coordinate installation of roof curbs, equipment supports, and roof penetrations. These items
are specified in Division 8 Sections.
1.08 EXTRA MATERIALS
A. Furnish extra materials described below that match products installed and that are packaged
with protective covering for storage and identified with labels describing contents.
2.00 PRODUCTS
1. Belts: One set for each belt-driven unit.
2.01 MANUFACTURERS
A. Manufacturers: Subject to compliance with requirements, provide products by one of the following:
1. Centrifugal Roof Ventilators:
a. Aerovent; a Twin City Fan Company.
b. Breidert Air Products, Inc.
c. Broan Mfg. Co., Inc.
d. Carnes Company HVAC.
e. Cook, Loren Company.
f. Greenheck Fan Corp.
g. Hartzell Fan, Inc.
h. ILG Industries, Inc./American Coolair Corp.
i. JennFan; Div. of Breidert Air Products, Inc.
j. PennBarry
2. Ceiling-Mounting Ventilators:
a. Breidert Air Products, Inc.
b. Broan Mfg. Co., Inc.
c. Carnes Company HVAC.
d. Cook, Loren Company.
e. Greenheck Fan Corp.
f. ILG Industries, Inc./American Coolair Corp.
g. JennFan; Div. of Breidert Air Products, Inc.
h. PennBarry
Power Ventilators 23 34 23 - 2
DPR09328