final bid specs 09328.pdf - Freese and Nichols, Inc.

B. Verify that units are installed and connected according to the Contract Documents.
C. Lubricate bearings, adjust belt tension, and change filters.
D. Perform startup checks according to manufacturer's written instructions and do the following:
1. Fill out manufacturer's checklists.
2. Check for unobstructed airflow over coils.
3. Check operation of condenser capacity-control device.
4. Verify that vibration isolation devices and flexible connectors dampen vibration transmission
to structure.
END OF SECTION
Split System Air Conditioning Units 23 81 26 - 5
DPR09328