final bid specs 09328.pdf - Freese and Nichols, Inc.
final bid specs 09328.pdf - Freese and Nichols, Inc.
final bid specs 09328.pdf - Freese and Nichols, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.00 PRODUCTS<br />
2.01 PIPE AND FITTINGS<br />
A. WATER PIPING BURIED BEYOND 5'-0” OF BUILDING:<br />
1. Copper tube for 2-1/2" diameter <strong>and</strong> greater: (ASTM B88) Type K or L hard drawn.<br />
Fittings (ANSI/ASME B16.8) cast copper or (ANSI/ASME B16.22) wrought copper.<br />
Joints: AWS A5.8 BCuP silver braze.<br />
2. PVC Pressure Pipe for 3" Diameter or Less: Polyvinyl Chloride pressure pipe, schedule<br />
40 [80] (ASTM D1785) <strong>and</strong> fittings, (ASTM D2466).<br />
3. PVC Piping for 4" Diameter <strong>and</strong> Greater: Pipe: (AWWA C900), DR 18. Fittings:<br />
(ANSI/AWWA C110), ductile iron, st<strong>and</strong>ard thickness. Joints: (ANSI/AWWA C111)<br />
rubber gasket push-on mechanical joint.<br />
B. WATER PIPING BURIED WITHIN 5'-0” OF BUILDING:<br />
1. Copper Tubing: For 2" diameter <strong>and</strong> less, (ASTM B88), Type L or K or annealed.<br />
Fittings: ANSI/ASME B16.18, cast copper or ANSI/ASME B16.22, wrought copper.<br />
Joints: AWS A5.8 BCuP silver braze.<br />
C. WATER PIPING ABOVE GRADE:<br />
1. Copper Tubing: For 4" diameter <strong>and</strong> less, (ASTM B88), Type L, hard drawn. Fittings:<br />
ANSI/ASME B16.18, cast brass, or ANSI/ASME B16.22, wrought copper. Joints:<br />
(ANSI/ASTM B32), solder, (Grade 95TA) or Copper Pipe 2" through 6" may be installed<br />
using mechanical type couplings on roll-grooved pipe; coupling housing, ductile iron<br />
(ASTM A536) grade 65-45-12, with factory coat copper alkyd enamel paint. Gaskets,<br />
flanges, shall be rated for the system by the manufacturer.<br />
D. SANITARY DRAIN, SANITARY WASTE AND VENT PIPING (DWV) BURIED:<br />
1. Cast Iron Pipe: (ASTM A74) service weight. Fittings: Cast iron. Joints: Hub-<strong>and</strong>-spigot,<br />
CISPI HSN compression type with (ASTM C564) neoprene gaskets.<br />
2. PVC DWV Pipe: Polyvinyl Chloride, Schedule 40 (ASTM D2665) pipe, <strong>and</strong> fittings<br />
(ASTM D2466).<br />
3. PVC Sewer Pipe (Beyond 5'-0" of Building): Polyvinyl Chloride Gravity Sewer Pipe<br />
(ASTM 3034) SDR 35, or (ASTM F 789) PS 46 <strong>and</strong> Fittings, with elastomeric Joints. (Uni-<br />
Bell B-4-82, ASTM M D3212)<br />
E. SANITARY DRAIN, SANITARY WASTE AND VENT PIPING (DWV) ABOVE GRADE:<br />
1. Cast Iron Pipe: (ASTM A74), service weight. Fittings: Cast iron. Joints: Hub-<strong>and</strong>spigot,<br />
CISPI HSN compression type with (ASTM C564) neoprene gaskets.<br />
2. Cast Iron Pipe: (CISPI 301), hubless, service weight. Fittings: Cast iron. Joints: Castiron<br />
couplings (ASTM A48, Class 30-A) with neoprene gaskets (ASTM C-1277, ASTM<br />
D412 18-8 <strong>and</strong> CISPI 310) stainless steel bolts <strong>and</strong> nuts; manufactured by MG Piping<br />
Products Co. or equal.<br />
F. CONDENSATE DRAIN PIPING, ABOVE GRADE<br />
1. Copper Tubing: For 4" diameter <strong>and</strong> less, (ASTM B88), Type L, hard drawn. Fittings:<br />
ANSI/ASME B16.18, cast brass, or ANSI/ASME B16.22, wrought copper. Joints:<br />
(ANSI/ASTM B32), solder, (Grade 95TA) or Copper Pipe 2" through 6" may be installed<br />
using mechanical type couplings on roll-grooved pipe; coupling housing, ductile iron<br />
(ASTM A536) grade 65-45-12, with factory coat copper alkyd enamel paint. Gaskets,<br />
flanges, shall be rated for the system by the manufacturer.<br />
G. COMPRESSED AIR PIPING, ABOVE GRADE<br />
1. Copper Tubing: ASTM B88, Type K hard drawn. Fittings: ANSI/ASME B16.18, cast<br />
brass, or ANSI/ASME B16.22, wrought copper. Joints: ANSI/ASTM B32, solder, Grade<br />
95TA.<br />
Plumbing Systems 22 00 01 - 3<br />
DPR09328
Change language