TROLL 9500 Operator's Manual - Geotech Environmental Equipment

IndexPressure rating, sensors, 51, 65Pressure sensorabout, 46–47absolute vs. gauged, 47factory calibration, 46field recalibration, 47non-vented vs. vented, 47recalibration, 53zeroing, 47Pressure setup, 48–50summary, 50Product specifications, 10–11Profiling, 31–34changing channels displayed, 32, 33, 34changing measurement units, 34changing sample rate, 27, 34depth or level, 32dissolved oxygen, 32exiting the Profiler, 34graphing data, 32logging data, 34retrieving data, 34starting software in Profiler mode, 27, 34starting the Profiler, 31turbidity, 32, 128PSIA, 47PSIG, 47Pumping tests, 46QQuick Cal, 17–20, 28, 61Rsensors that cannot use, 20with RDO sensor installed, 17, 96RDO sensor. See Dissolved oxygen sensor,optical (RDO)Real-time readings. See ProfilingRefresh button, 24, 25Removing sensors, 60Repair service, 3Resistivity, 77Restrictor, 6RMA, 3RuggedReader, 9, 14SSalinity, 77and RDO sensor, 36, 89Scheduled start mode, 37SDI-12, 130–134adapter, 130commands, 131, 133enable/disable, 26, 130out-of-range readings, 132wiring, 130Sealso-rings, 141sensor o-rings, 60Sensors, 58ammonium, 104barometric pressure, 56chloride, 110conductivity, 72dissolved oxygen, optical (RDO), 89installing, 13nitrate, 115o-rings, 60pH, 66pH/ORP, 97pressure, 46removing, 60replacement, 65serial number, 2, 65specifications, 10storage, 63temperature, 54turbidity, 122Serial number, 2Settings options, 27Show Calibration Report button, 64Slug tests, 46Snapshot button (Profiler), 34Software, 9. See also Win-Situ, Pocket-SituSoftware upgrade, 3Specifications, 10–11Specific conductance, 76Specific gravity, 49Stirrer, 62, 65Stirringand polarographic D.O. measurement, 86–88during calibration, 62Surface mode, 48TTechnical support, 3Temperatureabout, 54and calibration, 55, 62units, 55Temperature sensor, 54Test name, 36Tests, 35adding to device, 21, 35cancelling, 41cloning, 41deleting, 30, 41event, 36, 37extracting, 40linear, 36, 37linear average, 37, 38manual start mode, 37measurement interval, 37measurement schedules, 36printing, 45saving as text files, 45scheduled start mode, 37setting up, 35starting, 40status symbols in Navigation tree, 39stopping, 37, 40viewing, 30, 43Test setup, 35TROLL 9500 Operator’s Manual 1560095110 rev. 007 01/09