FMS - GAIL

1.1.11 The "SPECIFICATION" shall mean all directions the various technical
specifications, provisions attached and referred to the Tender
Documents which pertain to the method and manner of performing the
work or works to the quantities and qualities of the work or works and
the materials to be furnished under the CONTRACT for the work or
works, as may be amplified or modified by the GAIL or
ENGINEER-IN-CHARGE during the performance of CONTRACT in
order to provide the unforseen conditions or in the best interests of the
work or works. It shall also include the latest edition of relevant
Standard Specifications including all addenda/corrigenda published
before entering into CONTRACT.
1.1.12 The "DRAWINGS" shall include maps, plans and tracings or prints or
sketches thereof with any modifications approved in writing by the
ENGINEER- IN-CHARGE and such other drawing as may, from time
to time, be furnished or approved in writing by the
ENGINEER-IN-CHARGE.
1.1.13 The "TENDER" means the proposal along with supporting documents
submitted by the CONTRACTOR for consideration by the
EMPLOYER.
1.1.14 The "CHANGE ORDER" means an order given in writing by the
ENGINEER-IN-CHARGE to effect additions to or deletion from and
alteration in the works.
1.1.15 The "COMPLETION CERTIFICATE" shall mean the certificate to be
issued by the ENGINEER-IN-CHARGE when the works have been
completed entirely in accordance with CONTRACT DOCUMENT to his
satisfaction.
1.1.16 The "FINAL CERTIFICATE" in relation to a work means the certificate
regarding the satisfactory compliance of various provision of the
CONTRACT by the CONTRACTOR issued by the ENGINEER-IN-
CHARGE/EMPLOYER after the period of liability is over.
1.1.17 “DEFECT LIABILITY PERIOD” in relation to a work means the
specified period from the date of COMPLETION CERTIFICATE upto
the date of issue of FINAL CERTIFICATE during which the
CONTRACTOR stands responsible for rectifying all defects that may
appear in the works executed by the CONTRACTOR in pursuance of
the CONTRACT and includes warranties against
Manufacturing/Fabrication/ Erection/Construction defects covering all
materials plants, equipment, components, and the like supplied by the
CONTRACTOR, works executed against workmanship defects.
1.1.18 The "APPOINTING AUTHORITY" for the purpose of arbitration shall
be the CHAIRMAN and MANAGING DIRECTOR or any other person
so designated by the EMPLOYER.
1.1.19 "TEMPORARY WORKS" shall mean all temporary works of every kind
required in or about the execution, completion or maintenance of
works.
1.1.20 "PLANS" shall mean all maps, sketches and layouts as are
incorporated in the CONTRACT in order to define broadly the scope
and specifications of the work or works, and all reproductions thereof.
1.1.21 "SITE" shall mean the lands and other places on, under, in or through
which the permanent works are to be carried out and any other lands
or places provided by the EMPLOYER for the purpose of the
CONTRACT.
1.1.22 "NOTICE IN WRITING OR WRITTEN NOTICE" shall mean a notice in
50