Palm Pre 2 User Guide (World Ready) - DevDB

3 If VPNC is not selected already in the Connection Type field, tap the
Connection Type field, and tap VPNC.
4 Tap Enter server name and enter the server name.
5 Tap Next.
6 Enter the information you got from your system administrator.
NOTE Dead Peer Detection When selected, if no VPN traffic is received for five
minutes, the client checks to see if the VPN server is still available.
NOTE Encryption Method Tap an encryption method: Secure forces the client
to use more secure AES or 3DES algorithms. Weak allows the weaker 1DES
algorithm. Strong encryption may still be used, depending on what the VPN server
decides. None enables no encryption. Encryption is not disabled and may still be
used, depending on the VPN server. With the None option, the VPN profile is
simply allowed to use no encryption.
7 Tap Connect.
8 If required, enter your security token or other password, and tap Done.
9 Tap Continue to acknowledge that you are accessing a private
network.
Add a Cisco AnyConnect VPN profile
BEFORE YOU BEGIN Get the following information from your system
administrator:
• VPN server name
• Username and password
• Security token or other password
1 Open VPN .
2 Tap Add Profile.
3 Tap the Connection Type field, and tap Cisco AnyConnect.
4 Tap Enter server name and enter the server name.
5 Tap Next.
Chapter 9 : Web and wireless connections 167