R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
"Segment#"
"Waveform"
"Clock Rate"
"Samples"
"Period"
"Path"
"Comment"
"Info"
Indication of segment index. The segment index is used to select the
segment to be output.
The segment index also defines the sequence of the output during triggering
in the "Next Segment" or "Next Segment Seamless".
Indication of the waveform file name of the segment.
Indication of the clock rate of the segment.
Indication of the number of samples in the segment.
Indication of the segment duration.
Indication of the location of the waveform file used for the corresponding
segment.
Indication of the comment on the segment.
Opens a dialog with detailed information about the currently selected
waveform.
Remote command:
n.a.
Append
Opens the file menu to enter the file name of the waveform file to be appended.
Remote command:
​[:​SOURce]:​BB:​ARBitrary:​WSEGment:​CONFigure:​SEGMent:​CATalog?​
on page 230
​[:​SOURce]:​BB:​ARBitrary:​WSEGment:​CONFigure:​SEGMent:​APPend​
on page 229
Delete
Deletes the selected segment.
Remote command:
​[:​SOURce]:​BB:​ARBitrary:​WSEGment:​CONFigure:​DELete​ on page 227
Shift Seg.# Up/Down
Shifts the selected segment up and down.
5.10.5.2 Blank Segment
The Blank Segment section is where a blank segment can be configured.
Software Manual 1008.0858.42 ─ 10
107