R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
Standard Modulation Symbol Rate Filter Coding Parameter for SCPI
command
Bluetooth
DECT
ETC (ARIB STD
T55)
2FSK, Deviation
160.0 kHz
2FSK, Deviation
288.0 kHz
ASK, ASK Depth
100%
1.0 Msym/s Gauss, B*T = 0.5 OFF BLUetooth
1.152 Msym/s Gauss, B*T = 0.5 OFF DECT
1.024 Msym/s Split Phase, B*T = 2.0 OFF ETC
GSM MSK 270.833333
ksym/s
Gauss, B*T = 0.3 GSM GSM
GSM EDGE
8PSK EDGE
(3pi/8 8PSK)
270.833333
ksym/s
Gauss linear OFF GSMEdge
NADC pi/4 DQPSK 24.3 ksym/s Root Cosine, alpha = 0.35 NADC NADC
PDC pi/4 DQPSK 21.0 ksym/s Root Cosine, alpha = 0.50 PDC PDC
PHS pi/4 DQPSK 192.0 ksym/s Root Cosine, alpha = 0.50 PHS PHS
TETRA pi/4 DQPSK 18.0 ksym/s Root Cosine, alpha = 0.35 TETRA TETRa
WCDMA 3GPP QPSK 45° Offset 3.84 Msym/s Root Cosine, alpha = 0.22 WCDMA 3GPP W3GPp
TD-SCDMA QPSK 45° Offset 1.28 Msym/s Root Cosine, alpha = 0.22 OFF TCSCdma
cdma2000 Forward QPSK 1.2288 Msym/s cdmaOne + Equalizer cdma2000 CFORward
cdma2000 Reverse Offset QPSK 1.2288 Msym/s cdmaOne cdma2000 CREVerse
Worldspace QPSK 1.84 Msym/s Root Cosine, alpha = 0.40 OFF WORLdspace
TFTS pi/4 DQPSK 22.1 ksym/s Root Cosine, alpha = 0.40 TFTS/ TETRA TFTS
Remote command:
​[:​SOURce]:​BB:​DM:​STANdard​ on page 236
Save/Recall User - Digital Modulation
Calls the "Save/Recall User" menu.
From the "Save/Recall User Standard" menu the "File Select" windows for saving and
recalling user-defined standards and the "File Manager" can be called.
User standards are stored as files with the predefined file extension *.dm_stu. The file
name and the directory they are stored in are user-definable.
Remote command:
​[:​SOURce]:​BB:​DM:​STANdard:​ULISt:​CATalog?​ on page 261
​[:​SOURce]:​BB:​DM:​STANdard:​ULISt:​DELete​ on page 261
​[:​SOURce]:​BB:​DM:​STANdard:​ULISt:​LOAD​ on page 262
​[:​SOURce]:​BB:​DM:​STANdard:​ULISt:​STORe​ on page 262
Software Manual 1008.0858.42 ─ 10
68