R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
5.10.2.3 Baseband Filter - Custom Digital Mod
Table 5-9: Baseband filter
The R&S WinIQSIM2 offers a wide selection of predefined baseband filters. The filter
characteristic for the selected filter is displayed in the "More..." submenu in the "Filter"
menu section (see ​"Filter" on page 71). Additionally, a user defined filter can be selected
(see ​"User filter" on page 62).
The following table shows the filters that are available, together with the associated
parameters and remote control commands. The filter characteristic is displayed in graphical
form.
Cosine
Roll Off Factor
​SOUR:BB:DM:FILT:TYPE COS
​SOUR:BB:DM:FILT:PAR:COS 0.99
Bandwidth
​SOUR:BB:DM:FILT:PAR:COS:BAND
7200
Root Cosine
Roll Off Factor
SOUR:BB:DM:FILT:TYPE RCOS
SOUR:BB:DM:FILT:PAR:RCOS 0.99
Gauss (FSK)
B x T
SOUR:BB:DM:FILT:TYPE GAUS
SOUR:BB:DM:FILT:PAR:GAUS 2.5
Pure Gauss
B x T
SOUR:BB:DM:FILT:TYPE PGA
SOUR:BB:DM:FILT:PAR:PGA 2.5
Gauss Linearized
SOUR:BB:DM:FILT:TYPE LGA
Edge Narrow Pulse Shape
SOUR:BB:DM:FILT:TYPE ENPShape
Edge Wide Pulse Shape
SOUR:BB:DM:FILT:TYPE EWPShape
cdmaOne
SOUR:BB:DM:FILT:TYPE CONE
cdmaOne 705 kHz
SOUR:BB:DM:FILT:TYPE COF705
Software Manual 1008.0858.42 ─ 10
58