R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
Server Name - Import
Enters the name (IP address) of the connected server. To enter the name in this field,
the check box "Use Local Server" has to be unchecked.
Remote command:
​[:​SOURce]:​BB:​IMPort:​SERVer:​NAME​ on page 264
Port Number - Import
Enters the port number for the server connection. The default value is 1000.
Remote command:
​[:​SOURce]:​BB:​IMPort:​SERVer:​PORT​ on page 264
Transmission Timeout (s) - Import
Sets the duration after which the transmission is aborted in case of a server timeout.
Remote command:
​[:​SOURce]:​BB:​IMPort:​SERVer:​TTOut​ on page 264
Update Server Connection - Import
Updates the TCP/IP parameter and tries to establish a connection to the server.
Remote command:
​[:​SOURce]:​BB:​IMPort:​SERVer:​UPDate​ on page 264
Server ID - Import
Indicates the connected import server. If no import server is connected, "not connected"
is displayed. Seraching for a connected server is triggered with "Update Server
Connection".
Remote command:
​[:​SOURce]:​BB:​IMPort:​SERVer:​ID?​ on page 263
Filter/Clipping - Import
Calls the menu for setting baseband filtering and clipping. The current filter and the clipping
state are displayed next to the button.
The menu is described in ​chapter 5.10.6.3, "Filter / Clipping Settings", on page 117.
Marker - Import
Calls the menu for configuring the marker signals.
This menu is described in ​chapter 5.10.6.4, "Marker Menu", on page 120.
5.10.6.3 Filter / Clipping Settings
To access this dialog, select "Import Main Menu > Filter/Clipping".
The baseband filter, sample rate variation and clipping are defined in this menu.
Software Manual 1008.0858.42 ─ 10
117