R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
In case of selection "Variable FSK", the FSK type and the deviation for each symbols is
set in the "Variable FSK" section.
FSK Type - Digital Modulation
(Variable FSK only)
Selects the FSK modulation type for selection "Variable FSK".
You may choose from 4FSK, 8FSK and 16FSK.
Remote command:
​[:​SOURce]:​BB:​DM:​FSK:​VARiable:​TYPE​ on page 247
Deviation xxxx - Digital Modulation
(Variable FSK only)
Set the deviation of the associated symbol. The number of symbols depends on the
selected modulation type. The value of each symbol is indicated in binary format.
Remote command:
​[:​SOURce]:​BB:​DM:​FSK:​VARiable:​SYMBol:​DEViation​ on page 246
Current Modulation Type - Digital Modulation
Displays the currently selected modulation type together with its associated mapping.
Remote command:
n.a.
Filter
The filter is set in the Filter section.
Filter - Digital Modulation
Selects the baseband filter (see ​chapter 5.10.2.3, "Baseband Filter - Custom Digital
Mod", on page 58).
Remote command:
​[:​SOURce]:​BB:​DM:​FILTer:​TYPE​ on page 243
Filter Parameter - Digital Modulation
Sets the filter parameter.
Software Manual 1008.0858.42 ─ 10
71