R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
R&S Signal Generator Waveform and List Format
Example:
Usage:
Multi segment waveform
{WAVEFORM-1201:
#I 0,Seg0 ,Q 0,Seg0 ,I 1,Seg0 ,Q 1,Seg0 ,...I 99,Seg0 ,Q 99,Seg0 ,I 0,Seg1 ,Q 0,Seg1 ,I 1,Seg1 ,
Q 1,Seg1 ,… I 199,Seg1 ,Q 199,Seg1 }
2 segments: segment 0 with 100 I/Q pairs; segment 1 with 200 I/
Q pairs. Each I/Q pair consist of 2*16 bit = 4 bytes
Setting only
{MWV_SEGMENT_COUNT: NumOfSeg}
(mandatory for multi segment waveforms)
The tag contains the number of segments in the multi segment waveform in ASCII integer
format.
Example: {MWV_SEGMENT_COUNT: 2}
Multi segment waveform with 2 segments
Usage:
Setting only
{MWV_SEGMENT_LENGTH: SamplesSeg0, SamplesSeg1, …, SamplesSegN-1}
(mandatory for multi segment waveforms)
The tag contains a list of I/Q sample lengths for every segment in the multi segment
waveform in ASCII integer format.
Example: {MWV_SEGMENT_LENGTH: 100,200}
2 segments: 100 samples in segment 0 and 200 samples in segment
1.
Usage:
Setting only
{MWV_SEGMENT_START:
SampleStartOffsetSeg0, SampleStartOffsetSeg1, …, SampleStartOffsetSegN-1}
(mandatory for multi segment waveforms)
The tag contains a list of I/Q sample start offsets for every segment in the multi segment
waveform in ASCII integer format.
Example: {MWV_SEGMENT_START: 0,100}
2 segments with 100 samples in segment 0 and 200 samples in
segment 1.
Sample start offset of first segment 0 is 0 samples, start offset of
next segment 1 is the sample length of segment 0 = 100 samples.
Usage:
Setting only
{MWV_SEGMENT_CLOCK_MODE: Mode}
(mandatory for multi segment waveforms)
Software Manual 1008.0858.42 ─ 10
177