R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SOURce:BB:ARB:MCAR Subsystem
Example:
MMEM:CDIR 'D:/user/waveform'
sets the default directory to D:/user/waveform.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name mcar1_2.wv for the multi carrier waveform
file
Manual operation: See "File" on page 99
[:SOURce]:BB:ARBitrary:MCARrier:PRESet
The command sets all ARB multi carrier parameters to their default values.
Example:
Usage:
BB:ARB:MCAR:PRES
resets the ARB multi carrier parameters to default values.
Event
Manual operation: See "Set to Default" on page 93
[:SOURce]:BB:ARBitrary:MCARrier:SAMPles?
The command queries the resulting file size. The file size is returned in samples.
Return values:
Example:
Usage:
integer
Range: 0 to INT_MAX
Increment: 1
*RST: 0
BB:ARB:MCAR:SAMP?
queries the file size of the currently calculated multi carrier waveform.
Query only
Manual operation: See "File Size" on page 99
[:SOURce]:BB:ARBitrary:MCARrier:SETTing:CATalog?
This command queries the available settings files in the specified default directory. The
settings files are used to set the ARB multi carrier submenu. Only files with the file extension
*.arb_multcarr will be listed.
Return values:
Example:
string
MMEM:CDIR 'D:/user/waveform'
sets the default directory to D:/user/waveform.
BB:ARB:MCAR:SETT:CAT?
reads out all the settings files in the default directory.
Response: mcar1, mcar2
the directory contains the configuration files
mcar1.arb_multcarr and mcar2.arb_multcarr.
Software Manual 1008.0858.42 ─ 10
222