R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SOURce:BB:DM Subsystem
[:SOURce]:BB:DM:SETTing:STORe:FAST
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
0 | 1 | OFF | ON
*RST: 1
Manual operation: See "Fast Save" on page 65
[:SOURce]:BB:DM:STANdard:ULISt:CATalog?
This command reads out the files with Digital Standard settings in the default directory.
The default directory is set using command MMEM:CDIRectory. Only files with the file
extension *.dm_stu will be listed.
Return values:
Example:
string
MMEM:CDIR 'D:/user/dig_mod'
sets the default directory.
BB:DM:STAN:ULIS:CAT?
reads out all the files with Digital Standard settings in the default
directory.
Response: 'DM_QAM'
the file DM_QAM with Digital Standard settings is available.
Usage:
Query only
Manual operation: See "Save/Recall User - Digital Modulation" on page 68
[:SOURce]:BB:DM:STANdard:ULISt:DELete
This command deletes the selected file with Digital Standard settings. The directory is
set using command MMEM:CDIRectory. A path can also be specified, in which case the
files in the specified directory are read. The file extension may be omitted. Only files with
the file extension *.dm_stu will be deleted.
Setting parameters:
Example:
Usage:
string
BB:DM:STAN:ULIS:DEL 'DM_QAM'
deletes file 'DM_QAM'.
Setting only
Manual operation: See "Save/Recall User - Digital Modulation" on page 68
Software Manual 1008.0858.42 ─ 10
261