R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SOURce:BB:DM Subsystem
Parameters:
RCOSine | COSine | GAUSs | LGAuss | CONE | COF705 |
COEQualizer | COFequalizer | C2K3x | APCO25 | SPHase |
RECTangle | USER | PGAuss | LPASs | DIRac | ENPShape |
EWPShape | LTEFilter | LPASSEVM | APCO25Hcpm |
APCO25Lsm
Example:
*RST:
GAUSs
BB:DM:FILT:TYPE COS
selects the Cosine filter type.
Manual operation: See "Filter - Digital Modulation" on page 71
[:SOURce]:DM:FILTer:PARameter
Sets the filter parameter of the currently selected filter type.
To set the filter type, use command ​[:​SOURce]:​BB:​DM:​FILTer:​TYPE​
on page 243.
Parameters:
Example:
float
Range: 0.05 to 2.5
Increment: 0.01
*RST: 0.35
BB:DM:FILT:TYPE COS
DM:FILT:PAR 0.5
sets 0.5 roll-off factor for the cosine filter.
7.8.1.4 Modulation Settings
[:​SOURce]:​BB:​DM:​AQPSk:​ANGLe​...........................................................................244
[:​SOURce]:​BB:​DM:​ASK:​DEPTh​...............................................................................245
[:​SOURce]:​BB:​DM:​CODing​.....................................................................................245
[:​SOURce]:​BB:​DM:​FORMat​.....................................................................................245
[:​SOURce]:​BB:​DM:​FSK:​DEViation​...........................................................................246
[:​SOURce]:​BB:​DM:​FSK:​VARiable:​SYMBol:​DEViation​.......................................246
[:​SOURce]:​BB:​DM:​FSK:​VARiable:​TYPE​...................................................................247
[:SOURce]:BB:DM:AQPSk:ANGLe
For AQPSK modulation, sets the angle alpha between the point (0,0) and the I axis.
Parameters:
float
Range: 0 to 180
Increment: 0.01
*RST: 0
Default unit: Deg
Software Manual 1008.0858.42 ─ 10
244