R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Managing Messages in the Info Dialog
"SCPI"
Text
Indicates the SCPI error code.
A list of all currently permanent messages in the order of their occurrence, i.e., the
most recent message is displayed first.
With the following buttons, error messages can be cleared and a history of all messages
can be displayed:
"Delete"
"Delete All"
"Del. volatile"
"History"
Clears the highlighted message. This button is available only if the history of the
messages is displayed.
Clears all messages.
This button is available only if the history of the messages is displayed.
Clears all brief messages. This button is available only if the history of the messages
is displayed.
Calls the list of all messages that have occurred since instrument switch-on. The
most recent messages are displayed at the top of the list. When the button is
pressed again, the list of current messages is displayed.
Getting Additional Information on the Message
► In the "Info" dialog, click a message to select it.
In the lower section of the dialog, additional information on the highlighted message
is displayed.
Displaying all Messages
► In the "Info" dialog, click the "History" button.
A history of all messages that have occurred since R&S WinIQSIM2 software was
started is listed in the upper dialog pane. The most recent message is displayed first.
Deleting an Error Message
► In the "Info" dialog, select the highlighted message and click the "Delete" button.
Tip: This button is available only when the history of the messages is displayed.
The highlighted message is cleared.
Deleting all Error Messages
► In the "Info" dialog, click the "Delete All" button.
Tip: This button is available only when the history of the messages is displayed.
All messages are cleared.
Software Manual 1008.0858.42 ─ 10
29