R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
R&S Signal Generator Waveform and List Format
Example:
Usage:
DATA LIST-17: #d0d1...dx...d127}
16 bytes containing 128 data bits, first bit is the MS bit of the first
byte.
Setting only
{DATE: yyyy-mm-dd;hh:mm:ss}
(optional)
The tag contains the date and time at which the file was created. The year must be
expressed as four digits. The instrument does not analyze this tag.
Example: {DATE: 2009-04-02;14:32:12}
BB:ARB:WAV:TAG? 'DATE'
queries the content of the DATE tag of the selected waveform file.
Response: '2009-04-02;14:32:12'
the waveform was created on April 2, 2009 at 14 hrs 32 min
Usage:
Setting only
{EMPTYTAG-Length: #EmptySequence}
(mandatory in automatically generated one and multi segment waveforms)
This tag is empty, i.e. contains no data, and is used as used as placeholder.
Setting parameters:
Length
An ASCII integer value that specifies the number of bytes in the
EMPTYTAG, i.e. defines the number of bytes from the colon : to
the end brace }
EmptySequence
An empty sequence containing blanks only. The number of used
blanks is calculated as the difference between the hex addresses
of the {WAVEFORM} tag and the hash sign # in the {EMPTYTAG}.
The {WAVEFORM} tag always starts at hex address #4000.
Software Manual 1008.0858.42 ─ 10
172