R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Operating Menu and Toolbar in the Main Window
5 Graphical User Interface
In the following, a detailed description of the R&S WinIQSIM2 user interface is given. The
Main window with the block diagram is the operating and control interface for the whole
program. From here, all program functions are accessible. This panel is displayed after
the start of R&S WinIQSIM2. The program always loads the previously used settings so
you can continue your work in the next session.
5.1 Operating Menu and Toolbar in the Main Window
At the top of the Main window of R&S WinIQSIM2, there are the menu bar, the tool bar,
and the Info bar with its corresponding Info button.
To offer the user a familiar environment, operation is very similar to operation of MS
Windows user interfaces. All menus and dialogs are built using known elements, e.g.,
selection lists, check boxes, and entry fields.
A blue frame indicates that the selected item is active. In the highlighted element, entries
can be made.
Table 5-1: Content of the menu
File Transmission Graphics Help
New Instruments Graphic 1 Contents
Open Transmit Graphic 2 Index
Save Graphic 3
Save as
Setup
Exit
The main menu functions are also accessible via the toolbar with its icons below the menu
selection line.
Table 5-2: Toolbar icons in R&S WinIQSIM2
New
Resets the system to default.
Open
Loads a previously stored configuration file containing all settings.
Save as
Stores all settings made by R&S WinIQSIM2 in a configuration file.
Transmit
Opens the Transmit dialog.
Graphics
Activates the small graphics display at the bottom of the diagram.
Software Manual 1008.0858.42 ─ 10
26