R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
Load User Filter- Filter - Digital Modulation
Calls the menu "Select List File User Filter" for selecting a user-defined filter file with
extansion *.vaf (see ​"User filter" on page 62). The button is only available if filter type
"USER" is selected.
The button "File" "Manager" calls the "File" "Manager" menu. The "File" "Manager" menu
is used to display and delete files.
Remote command:
​[:​SOURce]:​BB:​DM:​FLISt:​SELect​ on page 258
​[:​SOURce]:​BB:​DM:​FLISt:​CATalog?​ on page 251
​[:​SOURce]:​BB:​DM:​FLISt:​DELete​ on page 257
Current Filter Response
Displays the filter characteristic of the currently selected filter.
Remote command:
n.a.
Power Ramp
The lower part of the Custom Digital Modulation menu is used for setting markers and
for power ramp settings.
Power Ramp Control - Digital Modulation
Calls the power ramp control menu (see ​"Power Ramp Control" on page 80).
Remote command:
n.a.
Marker - Digital Modulation
Calls the "Marker" menu, used to configure the marker output signals.
See ​"Marker Mode" on page 83.
Remote command:
n.a.
List Management
The "List Management" menu is called from the "Custom Digital Modulation" main menu.
Software Manual 1008.0858.42 ─ 10
73