R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SOURce:BB:IMPort Subsystem
Usage:
Setting only
Manual operation: See "Save/Recall - Import" on page 115
[:SOURce]:BB:IMPort:SETTing:STORe
Stores the current import settings into the selected file. The directory is set using command
MMEM:CDIRectory. A path can also be specified, in which case the files in the
specified directory are read. Only the file name has to be entered. Import settings are
stored as files with the specific file extensions *.import.
Setting parameters:
Example:
Usage:
string
BB:IMP:SETT:STOR 'import_1'
stores the current import settings into file import_1.
Setting only
Manual operation: See "Save/Recall - Import" on page 115
[:SOURce]:BB:IMPort:SETTing:STORe:FAST
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
0 | 1 | OFF | ON
*RST: 1
[:SOURce]:BB:IMPort:SRATe:VARiation?
Queries the sample rate variation.
Return values:
Example:
Usage:
float
Range: 400 to 40E6
Increment: 0.001
*RST: 20E6
BB:IMPort:SRATe:VARiation?
Query only
Manual operation: See "Sample Rate Variation " on page 119
Software Manual 1008.0858.42 ─ 10
266