R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
STATus Subsystem
// :SOURce1:BB:PROGress:MCODer:DM:FILTer?
// 100
[:​SOURce]:​BB:​PROGress:​MCODer?​........................................................................288
[:​SOURce]:​BB:​PROGress:​MCODer:​ARBitrary:​MCARrier?​..........................................288
[:​SOURce]:​BB:​PROGress:​MCODer:​ARBitrary:​WSEGment?​.......................................288
[:​SOURce]:​BB:​PROGress:​MCODer:​DM:​FILTer?​.......................................................288
[:SOURce]:BB:PROGress:MCODer?
[:SOURce]:BB:PROGress:MCODer:ARBitrary:MCARrier?
[:SOURce]:BB:PROGress:MCODer:ARBitrary:WSEGment?
Queries the status of an initiated process, like for example the calculation of a signal in
accordance to a digital standard, or the calculation of a multi carrier or multi segment
waveform file.
Return values:
Example:
Usage:
integer
Indicates the task progress in percent
Range: 0 to 100
Increment: 1
*RST: 100
see ​example "Querying the status of the Create Waveform file
process" on page 287
Query only
[:SOURce]:BB:PROGress:MCODer:DM:FILTer?
Queries the status of an applied offline filtering, like for example during the calculation of
a waveform and a multi carrier waveform file.
Return values:
Example:
Usage:
integer
Indicates the task progress in percent
Range: 0 to 100
Increment: 1
*RST: 100
see ​example "Querying the status of the Create Waveform file
process" on page 287
Query only
7.12 STATus Subsystem
This system contains the commands for the status reporting system. See also ​chapter
6.1.5, "Status Reporting System", on page 155 for detailed information.
Software Manual 1008.0858.42 ─ 10
288