R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Getting Started
Signal Configuration Examples
2. Make the following entries:
●
●
●
●
"Sequence Length" = 511 Symbols
"Symbol Rate" = 1.000 000 ksym/s
"Modulation Type" = 16QAM
"Filter" = Root Cosine
3. Click the "State" button to change the state to On.
A bar appears indicating the calculation progress. The waveform is generated. It can
be checked by means of a graphic tool.
4.3.4 Displaying and Configuring the Graphical Representation of the
Waveform Signal
1. In the Main window, select "Graphics > Graphic 1 > Graphic 1 (Preview Only)".
A small graphics display labelled "Graphic 1" opens at the bottom of the block diagram.
A small icon shows up in the signal flow path indicating the position from
where the graphics obtains its data.
2. Double-click the small graphics display to open the graphics dialog.
Software Manual 1008.0858.42 ─ 10
20