R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Graphical User Interface
Baseband Block
The data and control lists are selected and created in the "File Select" menu which is
called up by means of the "Data List..." and "Control List..." buttons.
The "File Manager" is used to copy, rename and delete files and to create directories.
To ensure that the selected data or control list is used for generating the digital signal,
the list must be selected as the data source:
Data Parameter Selection
Digital data "Source" DList
Marker "Marker Mode" CList
Control signals
CW, Level Attenuation and Burst
Gate
"Source"
Internal
The data editor is called using the "Edit Data List..." and "Edit Control List ..." buttons.
The contents of the selected list are displayed.
Select Data/Control List - Digital Modulation
Selects data/control list. This opens the "File Select" window in which the data/control list
can be selected.
Remote command:
​[:​SOURce]:​BB:​DM:​DLISt:​SELect​ on page 257
​[:​SOURce]:​BB:​DM:​CLISt:​SELect​ on page 254
Create Data/Control List - Digital Modulation
Creates new data/control list. This opens the "File Select" window in which the data/
control list can be created.
The file name has to be entered in field "File Name:". The new list contains no data, it
can be edited in the list editor.
Remote command:
​[:​SOURce]:​BB:​DM:​DLISt:​SELect​ on page 257
​[:​SOURce]:​BB:​DM:​CLISt:​SELect​ on page 254
Software Manual 1008.0858.42 ─ 10
74