R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SOURce:BB:ARB:MCAR Subsystem
This multi carrier waveform is saved with the file name specified with command
SOUR:BB:ARB:MCAR:OFIL. The file extension is *.wv. Digital standard "ARB" is activated,
the new multi carrier waveform is loaded and is output in accordance to the trigger
settings.
Example:
Usage:
MMEM:CDIR 'D:/user/waveform'
sets the default directory to D:/user/waveform.
BB:ARB:MCAR:OFIL 'mcar1_2'
defines the file name mcar1_2.wv for the multi carrier waveform.
BB:ARB:MCAR:CLO
creates multi carrier waveform mcar1_2.wv.
The new multi carrier waveform is loaded and digital standard
"ARB" is activated.
Event
Manual operation: See "Create and Load" on page 100
[:SOURce]:BB:ARBitrary:MCARrier:CLOCk?
The command queries the resulting sample rate at which the multi carrier waveform is
output by the arbitrary waveform generator. The output clock rate depends on the number
of carriers, carrier spacing and input sample rate of the leftmost or rightmost carriers.
Return values:
Example:
Usage:
float
Range: 400 to Max
Increment: 1E-3
BB:ARB:MCAR:CLOC?
queries the ARB multi carrier output clock rate.
Query only
Manual operation: See "Clock Rate" on page 99
[:SOURce]:BB:ARBitrary:MCARrier:CREate
This command creates a multi carrier waveform using the current settings of the carrier
table. The multi carrier waveform is saved into the file defined with command
SOUR:BB:ARB:MCAR:OFIL. The file extension is *.wv.
Example:
MMEM:CDIR 'D:/user/waveform'
sets the default directory to D:/user/waveform.
BB:ARB:MCAR:OFIL 'multi_wv1'
defines the file name multi_wv1.wv for the multi carrier waveform.
BB:ARB:MCAR:CRE
creates multi carrier waveform multi_wv1.wv.
Usage:
Event
Manual operation: See "Create" on page 100
Software Manual 1008.0858.42 ─ 10
217