R&S WinIQSIM2 Software Manual - Rohde & Schwarz

R&S ® WinIQSIM2
Remote Control Commands
SYSTem Subsystem
Positive error numbers are instrument-dependent. Negative error numbers are reserved
by the SCPI standard.
Parameters:
Example:
string
List of: Error/event_number,"Error/event_description>[;Devicedependent
info]"
If the queue is empty, the response is 0,"No error"
SYST:ERR:ALL?
queries all entries in the error queue.
Response: 0, 'no error'
No errors have occurred since the error queue was last read out.
:SYSTem:ERRor:CODE:ALL?
Queries all entries in the error queue and then deletes them. Only the error numbers are
returned and not the entire error text.
Return values:
Example:
Usage:
string
0
"No error", i.e. the error queue is empty
positive value
Positive error numbers denote device-specific errors
negative value
Negative error numbers denote error messages defined by SCPI.
SYST:ERR:CODE:ALL
queries all entries in the error queue.
Response: 0
no errors have occurred since the error queue was last read out.
Query only
:SYSTem:ERRor:CODE[:NEXT]?
Queries the oldest entry in the error queue and then deletes it. Only the error number is
returned and not the entire error text.
Return values:
string
0
"No error", i.e. the error queue is empty
positive value
Positive error numbers denote device-specific errors
negative value
Negative error numbers denote error messages defined by SCPI.
Software Manual 1008.0858.42 ─ 10
293