Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

MI 611-186 – June 1996
Getting Started
NOTE: In order for the analyzer and a personal computer to communicate, the PC
must be equipped with a serial port configured with its own unique IRQ (interrupt
request). If, for example, you will be using COM2 with an IRQ of 3, no other device
can share this interrupt.
The next screen appears automatically.
Figure 2. Microsoft Diagnostic Screen 2
4. Click on Com Ports (or type “C”). This displays the status of your serial COM
ports, as shown in the next screen.
Figure 3. Microsoft Diagnostic Screen 3
5. Note the parameters for your serial ports. The PCIP configuration must be set to
match these settings.
2