Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

MI 611-186 – June 1996
Examples
Action
4. When complete, press any key.
Screen Display
This screen appears, with the file highlighted.
To view or edit this file, press F2.
5. Pressing F2 displays the file as shown in
this screen. You may edit the file and use
the function keys identified at the bottom
of the screen.
If the analyzer software detected errors
in the file, pcip creates a new file called
PCIP.ERR. You can view this file by
selecting the file and pressing F2, but
better yet, press F3.
6. Pressing F3 enables you to jump directly
to the errors in the original file, as
shown in the next screen.
7. Jump to errors and edit. Press F3.
8. Correct the error and repeat Steps 6-8,
as required.
9. Press F9 to save the edited file.
22