Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

Appendix A: Text Data Formats MI 611-185 – June 1996
LOG SAMPLE TIME UNIT=SEC|MIN
LOG DATA STORED=SAMPLE|AVERAGE|MAXIMUM
BARCODE VERIFY=OFF|ON
ROUTE ACTIVE=OFF|ON
TAG ACTIVE=OFF|ON
CALIBRATION
-----------
CAL AUTO ACCEPT=OFF|ON
CAL AUTO SAVE=OFF|ON
CAL UNIT LOCK=OFF|PPB|PPM|PERCENT
CAL NUM SPAN POINTS (PID)=n
CAL SPAN PT 1 (PID)=ffffff PPB|PPM|PERCENT
CAL SPAN PT n (PID)=ffffff PPB|PPM|PERCENT
CAL NUM SPAN POINTS (FID)=n
CAL SPAN PT 1 (FID)=ffffff PPB|PPM|PERCENT
CAL SPAN PT n (FID)=ffffff PPB|PPM|PERCENT
BACKGROUND CORRECTION (PID)=OFF|ON
BACKGROUND CORRECTION (FID)=OFF|ON
RESPONSE FACTORS
----------------
SELECTED=n
MODE=FACTOR|CURVE
RF1 (PID) nnnnnnnnnn xx.xx + yy.yy
RF9 (PID) nnnnnnnnnn xx.xx + yy.yy
RF1 (FID) nnnnnnnnnn xx.xx + yy.yy
RF9 (FID) nnnnnnnnnn xx.xx + yy.yy
ALARMS
------
HIGH (PID)=ffffff PPB|PPM|PERCENT
LOW (PID)=ffffff PPB|PPM|PERCENT
STEL (PID)=ffffff PPB|PPM|PERCENT
HIGH (FID)=ffffff PPB|PPM|PERCENT
LOW (FID)=ffffff PPB|PPM|PERCENT
STEL (FID)=ffffff PPB|PPM|PERCENT
USER OPTIONS
------------
BARCODE READER=NONE|HP|PSC
DIGITAL DATA LOGGING=NONE|FID&PID|PPM
DISPLAY DELAY=SHORT|MEDIUM|LONG
KEY CLICK=OFF|ON
PC LINK TYPE=FOXBORO|FEMS|TEXT-MANUAL|TEXT-AUTO
PROBE=BASIC|ENHANCED
END
NOTES:
1. Lines containing information on uninstalled detectors (PID) or (FID) are not
output.
2. Spaces are allowed in names and other text fields entered by the user.
3. Number fields are right justified, leading spaces.
4. The second detector repeats the RF names. During download, the last RF name
encountered is used.
Sample Configuration File
CONFIGURATION
VER= 1.00
MODEL=TVA-1000B
SERIAL NUMBER=000007156962
DETECTOR=PID&FID
OPERATOR ID=USERID
LOGGING
-------
LOG MODE=NONE
LOG STORAGE FORMAT=NONE
LOG SAMPLE TIME=0
LOG SAMPLE TIME UNIT=SEC
LOG DATA STORED=SAMPLE
LOG UNIT LOCK=OFF
LOG AUTO REPEAT=OFF
LOG SAVE MODE=MANUAL
TAG ACTIVE=OFF
ROUTE ACTIVE=OFF
BARCODE VERIFY=OFF
CALIBRATION
-----------
83