Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

MI 611-186 – June 1996
Examples
Sending a File
To send a file of any type from the PC to the analyzer (after you have set up the system and
established a link at the analyzer in the PC LINK mode), follow a procedure similar to that for
receiving a file, except select F6=SEND instead of F5=RECEIVE. The procedure, therefore, is
as follows:
1. Select a file to be uploaded.
2. Press F6. The File Send screen appears.
3. Prepare analyzer by pressing 2 (Establish Link) in the PC Link menu.
4. Wait for transfer process to finish.
5. To view/edit the file, press F2.
If an error occurred, press F3 to jump from one error to another.
6. Edit the file to eliminate errors,
7. Press F9 to save the corrected file.
For an example of error detection and correction, refer to the example starting on the next
page.
20