Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

Appendix A: Text Data Formats
Route List File Format
The route list format is as follows:
Format
ROUTE LIST
VER=x.x
RUN ID=aaaa
END
Comments
Title, not processed
x=0-9
a=0-9, A-Z, a-z
Blank line, not processed
Blank line, not processed
See route entry header below: not processed
See route entry header below: not processed
See route entry header below: not processed
See route entry below
Blank line, not processed
Marks end-of-text
The first eight lines of the route list constitute the route header. The last three lines of the
route header are composed of text column headers (route entry header lines 1 and 2) and an
underline of dashes (route entry header line 3). The route entry headers are specified below by
specification of header text for lines 1 and 2 and starting position (all other characters blank
spaces, not tabs). Line 3 is a dash character ‘-’ for all route entry characters except the delimiter
(space instead).
The route entry header format is as follows:
Start Header Line 1 Header Line 2
0 TAG
17 AREA
26 SUBAREA
35 LEAK RATE
41 RESP FACT
46 EQP TYP
50 EQUIP SIZE
57 DESCRIPTION
105
106
The remaining lines in the route list are route entries. Each route entry consists of tag, area,
subarea, leak rate, response factor, equipment type, equipment size, and description.
The route entry format is as follows:
Byte Length Item Format
0 16 Tag text
16 1 delimiter space
17 8 Area text
25 1 delimiter space
26 8 Subarea text
34 1 delimiter space
35 5 Leak rate floating point
40 1 delimiter space
41 4 Response factor floating point
45 1 delimiter space
46 3 Equipment type text
49 1 delimiter space
50 6 Equipment size text
56 1 delimiter space
57 48 Description text
105 1 0DH
106 1 0AH
81