Thermo Scientific TVA-1000B Instruction Manual - Geotech ...

Introduction MI 611-185 – June 1996
Table 1. Specifications (Continued)
Electrical Interface
Connections
Mechanical Connections
Portability
Tool Kit
Item
Approximate Mass
Specification
Mating female connectors for Analog Output, RS-232 Interface
(Host), and Battery Charger are provided on the side of the analyzer
case below the keypad.
Mechanical connections for Sample Input and for Vent Outlet are
provided on the side and bottom surfaces.
The analyzer is designed to be carried by a removable shoulder strap.
The strap, which is provided with every instrument, does not hinder
the user when viewing or using the analyzer front panel. The strap is
designed to support the probe when the instrument is not in use and
to carry accessory tools.
An accessory tool kit is provided with each instrument. The kit
contains special tools for accessing the battery and removing the
detector capsules.
Analyzer (PID plus FID):
PID only —4.8 kg (10.5 lb)
FID only —4.8 kg (10.5 lb)
Dual — 5.2 kg (11.9 lb)
Probe Assembly:
Standard Probe — 0.55 kg (1.1 lb)
Enhanced Probe —0.79 kg (1.75 lb)
External Influences
This product is intended for use in indoor and outdoor environments as a portable instrument
carried by a user, as specified in the following table. The same environmental conditions
also apply to the sample stream being monitored.
5